## How many board feet are in a square foot?

A board foot is equal in volume to a square foot of lumber 1″ thick. A square foot of lumber/flooring, etc. would be 12″ x 12″ (or similar dimensions totaling 144 square inches), but could be of any thickness.

Table of Contents

### How do I convert board feet to square feet?

How to Convert Board Feet Into Square Feet

- Measure the length (L) of the board in inches and divide it by 12.
- Solve the following equation to calculate board feet: (W x T) x (L ÷ 12) = board feet.
- Divide the number of board feet by the thickness of the board. This will give you the square footage of the board.

**How many board feet is 400 square feet?**

Please share if you found this tool useful:

Conversions Table | |
---|---|

6 Square Feet to Boards = 72 | 300 Square Feet to Boards = 3600 |

7 Square Feet to Boards = 84 | 400 Square Feet to Boards = 4800 |

8 Square Feet to Boards = 96 | 500 Square Feet to Boards = 6000 |

9 Square Feet to Boards = 108 | 600 Square Feet to Boards = 7200 |

**How do I calculate board foot?**

The basic calculation for board feet is:

- Thickness x Width x Length / 12 = Board Feet.
- 2 x 4 x 10 / 12 = 6.667 Board Feet.
- A 2 x 10 -16′ has 26.67 board feet:
- 2 x 10 x 16 / 12 = 26.667 Board Feet.
- PCS x T x W x L / 12 = Board Feet.
- 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet.
- 1.25 x 6 x 14 / 12 = 8.75 Board Foot.

## How many square feet does 200 board feet cover?

200 square feet

A 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.

### How many board feet are in a 2x4x10?

6.66667

A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667.

**How much area does a board foot cover?**

To properly calculate a board foot you multiply thickness x width x length then divide this by 144. No matter how you slice it, there are 144 square inches in one board foot.

**How much wood do I need for a 2000 square foot house?**

To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.

## How do you explain board feet?

What is a Board Foot? – Ask Matt #10 – YouTube

### What is 600 board feet in square feet?

A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick.

**How many board feet is a 2×4?**

A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667. A 2x4x14 board has 9.33333 total board feet in it: The board foot factor (BFF) of a 2×4 is 0.66667.

**What’s the difference between a linear foot and a board foot?**

The main difference between a board foot and a linear foot is that a board foot is a measure of volume, whereas a linear foot is a measure of length. A board foot is generally used for lumber and is the multiplication of its width in feet, length in feet, and thickness in inches.

## How many board feet are in a 10×10 wall?

To go 10′ wide, you will need 20 boards. Each board will also be 10′ long. So, unless I’m asleep at the wheel, the answer to “how many board feet of 2″ thick material to cover a 10′ x 10′ wall” would be something like 20 x 10 = 200 BF. Don’t forget to figure in for an appropriate scrap factor.

### How much does it cost to frame a 2500 sq ft house?

The average cost to frame a house ranges from $7 – $16 per square foot1 or $11,200 – $48,0003 for homes between 1,600 and 3,000 square feet. The average size of a home is 2,687 square feet as of 2019, which would have cost $5,374 – $32,2443 to frame.

**What is the square footage of 200 board feet?**

**How much does 200 board feet cover in square feet?**

## What is board foot?

The board foot or board-foot is a unit of measurement for the volume of lumber in the United States and Canada. It equals the volume of a one-foot (305 mm) length of a board, one foot wide and one inch (25.4 mm) thick. Board foot can be abbreviated as FBM (for “foot, board measure”), BDFT, or BF.

### How many board feet is a 2x4x10?

**How many board feet are in a 2x4x8?**

How many board feet are in a 2×4?

Length of 2×4 (ft) | Number of board feet |
---|---|

10 | 62/3 |

12 | 8 |

14 | 91/3 |

16 | 102/3 |

**Is board foot or linear foot cheaper?**

You’re paying by the lineal foot. The longer the board, the more expensive it is.

## How much drywall do I need for a 1500 square-foot house?

How much drywall do i need for a 1500 square feet? You would need 47 sheets of drywall for 1500 square feet.

### How much lumber do I need for a 2000 square foot house?

Lumber Costs

A typical 2,000-square-foot home uses almost 16,000 board feet of lumber and 6,000 square feet of structural panels like plywood.

**How much lumber Do I need to build a 1 000 square foot house?**

House Construction

To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.

**How does board foot pricing work?**

Our lumber pricing is based on board feet (BF). A BF is a unit of measure that is equal to 1 inch by 12 inches by 1 foot. You calculate BF just like you write a standard board, then divide that by 12.

## How long does it take to drywall a 2000 sq ft house?

Installing drywall in a 12′ x 12′ room takes 2 to 3 days, including the drying time between each coat of drywall mud. Drywalling a 2,000 square foot home takes 3 days to 1 week, depending on the layout and the crew size.