What is FrogLube used for?
In the event the firearm is over lubricated, do a thorough cleaning with FrogLube Solvent or Super Degreaser; it will remove excess lubricant trapped in the action and inside the firearm spaces.
Table of Contents
Does FrogLube remove rust?
We got a model 700 here pretty typical you know deer gun you ever do run into a situation where you get a little bit of rust. You know on the finish you just take some of the froglet paste little
Is FrogLube extreme a CLP?
FrogLube Extreme CLP Bio-Based Cleaner Lubricant Preservative 1.5oz.
Does FrogLube remove copper?
Experimenting with Non-petroleum, Bio-based mixtures, FrogLube discovered the following shocking results during firearm testing: No burning. Cleans carbon, metals, fouling, lube, copper & lead.
Is FrogLube good for guns?
FrogLube is a REVOLUTION in firearms cleaning an lubrication! No longer must you contaminate your home, shop or body with toxic petrochemicals just to clean and lubricate your firearms! FrogLube is made from plant-based ingredients, and is 100% SAFE for you and the environment.
Is FrogLube Food Safe?
FROGLUBE® is a cutting edge bio-based lubricant made from “USDA Certified Food-Grade”. All ingredients are produced in the USA using a proprietary formula. It is a non-toxic substance that dissolves carbon on contact.
What is FrogLube solvent?
Product Overview. Clean you weapons like never before and watch carbon just fall out of your weapon. FrogLube Bio-Based Solvent surgically cleans and removed only what you want removed. This solvent will not harm or effect any permanent coating, surface, paint or sight material.
Who invented Froglube?
(Founder/Owner)
What is Frog Lube made of?
They discovered that Froglube is coconut oil plus a small amount of additives. Aside from the obvious Froglube smell, forum users speculate it also contains additives to prevent the oil from solidifying in cooler weather. Coconut oil has a relatively high melting point of 76 degrees (24 celcius).
What is the best copper solvent for gun cleaning?
Best for Copper Fouling: Barnes CR-10
Barnes CR-10 is one of the best gun cleaning solvents for removing copper fouling. This aggressive ammonia based solvent quickly breaks down and loosens fouling left by copper or copper coated ammunition, but it also comes with an aggressive smell.
What is the best solvent to clean a gun with?
The best way to break through all the grime and residue from shooting is to use the best gun solvents possible.
- Best Overall: Hoppe’s No. 9 Gun Bore Cleaner.
- Best Non-Toxic: CLP by Sage & Braker.
- Best for Rifles: M-Pro7 Gun Cleaner.
- Best Spray: Ballistol.
- Best Cleaner and Lube: Break Free CLP.
What is Froglube solvent?
What kind of oil do you use on a pocket knife?
You can use simple vegetable oil, but it isn’t very stable and may go rancid. Food-safe mineral oils (such as wood block oil) tend to work well. Here’s one great choice. Plain jane food-grade mineral oil should be available at your local pharmacy (as suggested by several commenters) for cheap also.
Is Frog Lube good for guns?
This eco-friendly solvent blasts through grime and gunk extremely well, permeates through metal, and leaves your gun shiny and protected. The only warning I should give you is that FrogLube works best when heat is applied. Therefore, the best way to melt the paste is to use a hair dryer or leave the gun out in the sun.
What is Froglube made of?
What is the best gun oil to use?
Best Overall: Hoppe’s Elite Gun Oil.
What gun cleaner does the military use?
CLP
Currently, when cleaning a weapon, warfighters use a conventional wet lubricant known as CLP (cleaner, lubricant, and preservative) that is continuously reapplied.
Is WD 40 good for cleaning guns?
Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable. Solvents, such as WD40, don’t remove any gunk or slime. Solvents dissolve gunk, which then moves the dissolved goo to another area of your gun that you cannot see.
What does the military use to clean guns?
Is wd40 good for knives?
WD-40 is good for knives because it won’t cause rust or damage. However, it’s only good when you’re looking for a cleaning solution. While it can loosen up dirt and grime on your knives, it doesn’t provide a protective film to prevent it from rusting.
Can you use olive oil to oil a knife?
Your knife should be fed a steady diet of oil or wax. Just about any oil will work – from clove oil to olive oil, and there are even some oils on the market specifically designed for knives. We recommend canola or corn oil over olive oil as olive oil can go rancid over time, but any food safe oil or wax will work.
Who invented Frog Lube?
What brand of CLP does the military use?
RADCOLUBE CLP
Radco Industries has been supplying the U.S. Military with critical application fluids since 2002. Our RADCOLUBE CLP (GUN OIL) is currently being used in combat operations by the U.S. Military.
Can you use WD 40 to clean a gun?
Should you oil the inside of a gun barrel?
Do not lubricate the bore using gun oil! For long term storage only, the bore can be treated with a heavier lubricant such as Barricade (or equivalent). This must be removed by cleaning the barrel prior to shooting the firearm!