What is the master code for Kwikset?

Posted on by Jessy Collins

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset lock code without the code?

A factory reset will delete all codes associated with the lock.

  1. Make sure the door is open and unlocked.
  2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
  3. Press and release the program button. You will hear one short beep.

How do you get a Kwikset lock code?

It is recommended that you change it to a code of your own.

  1. Make sure the lock is unlocked and the door is open.
  2. Enter your Programming Code – for new installation, default is 0-0-0-0.
  3. Press enter arrow. You will hear one beep.
  4. Press 4 .
  5. Press enter arrow. You will hear one beep.
  6. Enter a new Programming Code.

How do you program a Kwikset Smart code?

Quick set enter a programming code it must be between four and eight digits. Press quick-set re-enter the programming. Code. Press quick-set if you hear a long beep.

What is Kwikset programming code?

1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button.

How do I reset my Kwikset Smart code?

And then press and hold the program button while reinserting the battery pack keep holding the button for 30 seconds until the lock beeps and the status led flash.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I change my Kwikset lock code?

How do I add/delete a user code on my SmartCode 955?

  1. Make sure the door is open. Press and release the program button using the SmartKey tool or a paper clip. You will hear two beeps.
  2. Press 1. You will hear one short beep and the keypad will flash green once.
  3. Press the Kwikset button4) Enter a user code.

How do I change the master code on my Kwikset?

It is recommended that you change it to a code of your own.

  1. Make sure the lock is unlocked and the door is open.
  2. Enter your Mastercode – for new install, default is 0-0-0-0.
  3. Press the lock button. You will hear one beep.
  4. Press 7.
  5. Press the lock button.
  6. Enter a new Mastercode.
  7. Press the lock button.

How do I change my Kwikset user code?

Make sure the door is open If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and then keypad will flash green. Press 1 to add a permanent user code that can be used for entry at all times, until deleted. Press 7 to add a one-time user code.

How do I change the code on my door keypad?

How to change a code on a keypad door lock – 13 steps

  1. #1: Make sure that the door is open and unlocked.
  2. #2: Enter the programming code.
  3. #3: Press the lock button.
  4. #4: Press the “3” button.
  5. #5: Press the lock button.
  6. #6: Enter the access code you want to change.
  7. #7: Press the lock button.
  8. #8: Re-enter the programming code.

How do I change my door lock code?

How to Change the Code on a Digital Combination Door Lock – YouTube

How do I change my keypad code?

5 Steps to Change Master Code on Keypad Door Lock

  1. Step 1: Make sure that the door is open and unlocked.
  2. Step2: Touch the Keypad & Enter Codes.
  3. Step3: Enter *+01+#
  4. Step4: Enter Old Master Code +#
  5. Step5: Enter New Master Code.
  6. Step6: Repeat to Enter New Master Code.

How do I change the code on my Kwikset lock 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do you reset a Kwikset lock code 955?

Factory Resetting the Kwikset Smartcode 955/917 – YouTube

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

How do you reprogram a door lock?

How to Change Programming Code On Schlage Door Lock – YouTube

How do you change a Kwikset lock?

How to re-key your SmartKey Security™ locks?

  1. Prepare your door. Make sure you lock is installed on your door and that your door is all the way open.
  2. Insert current key.
  3. Insert the SmartKey tool fully and firmly into the SmartKey hole.
  4. Insert the new key you wish to use with the lock.
  5. Remove your new key.

How do you reset a locked 4 digit lock?

Reset the 4 Digit Master Lock Code – YouTube

How do I change the code on my Kwikset SmartCode 909?

Adding User Codes to Kwikset SmartCode 909

  1. Ensure your door is open.
  2. Press the Program button based on the position you want to assign the code. For instance, if you want the code to occupy position 3, press the program button three times.
  3. Enter a new User Code (4 or 8 digits).
  4. Press the Lock button on the keypad.

How do I reset my front door keypad?

  1. #1: Make sure that the door is open and unlocked.
  2. #2: Enter the programming code.
  3. #3: Press the lock button.
  4. #4: Press the “3” button.
  5. #5: Press the lock button.
  6. #6: Enter the access code you want to change.
  7. #7: Press the lock button.
  8. #8: Re-enter the programming code.

How do I change the code on my Kwikset aura lock?

For Aura and Halo Series of Locks Using App

  1. Open the Kwikset app.
  2. Tap the Menu icon.
  3. Select Account Settings.
  4. Select Account.
  5. Select Change Password.
  6. You will be prompted to enter your old password, then the New Password fields must be filled out.

How do I change the code on my Kwikset SmartCode 914?

How to add a user code on my Smartcode touchscreen?

  1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
  2. Press Checkmark symbol once.
  3. Enter Mastercode.

How do I reset my Kwikset electronic door lock?

2 Kwikset: Factory Reset

Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.

How do I program my Kwikset SmartCode 955?

How to enable/disable programming code on my SmartCode 955?

  1. A programming code enables you to make changes without needing to access the programming button.
  2. Make sure the door is open.
  3. Press 3.
  4. Press Kwikset button.
  5. Enter a programming code.
  6. Press Kwikset button.
  7. Re-enter programming code.