How do I fix my SMART event hard drive?

Unfortunately the only solution to this problem is to replace the drive (Replace it immediately). Though instead of doing a reinstall, first perform a complete system backup (i.e., include all jobs and settings when creating the backup), then replace the failing drive, and finally restore the backup.

Table of Contents

How do I know if my harddrive is failing?

Symptoms and Signs Of A Failing Hard Drive

Computer freezes, slows down or displays a blue screen.
Data gets corrupted and the buildup of bad sectors.
Unusual and Alien Sounds.
The Read/Write – Heads Crashed.
The Hard Drive’s Spindle Motor Malfunctioned.
The Hard Drive Exhibits PCB Problems.
Adaptives Deviations.

What does SMART status stand for?

Self-Monitoring, Analysis and Reporting Technology

(Self-Monitoring, Analysis and Reporting Technology; often written as SMART) is a monitoring system included in computer hard disk drives (HDDs) and solid-state drives (SSDs). Its primary function is to detect and report various indicators of drive reliability with the intent of anticipating imminent hardware failures.

What does SMART stand for in hard drive?

Self-Monitoring Analysis and Reporting Technology
S.M.A.R.T. stands for Self-Monitoring Analysis and Reporting Technology. S.M.A.R.T. technology was developed by a number of major hard disk drive manufacturers in a concerted effort to increase the reliability of drives.

Can HDD SMART be reset?

SMART is meant to be an audit of the drives history and is maintained by the drive itself, so you cannot “reset” or “clear” SMART values. Hard drives have spare space for recovery reasons.

Can a SMART error be fixed?

A system S.M.A.R.T. error means you should backup your data as soon as possible and maintain consistent backups. A S.M.A.R.T. warning based on excessive average temperature is common, and can sometimes be fixed by improving ventilation.

How do I fix a corrupted hard drive?

Methods to Fix Corrupted Hard Drive

Go to Computer/This PC >> Select Hard Drive >> Choose Properties.
Select Tools >> Error checking >> Check now >> Check local disk >> Start.
Shut down all open and running programs >> wait for the system to check upon the next boot >> restart the PC.

Can a hard drive last 10 years?

Generally, a hard drive has an average life span of about five years, but an unused hard drive can last a little longer. A good hard drive, if not used, can last up to 10 years even.

How do I fix SMART status?

How do I fix Smart status bad issue?

Reboot your computer and recover data.
Disable S.M.A.R.T error from the BIOS.
Check bad sectors on the hard drive.
Back up and replace the hard drive.

What causes SMART error?

Can you fix SMART errors?

How do I read a SMART report?

How to read SMART values and attributes

Identifier: the definition of the attribute.
Threshold: the minimum value for the attribute.
Value: current value of the attribute.
Worst: the smallest value of the attribute ever recorded.
Data: raw measured values provided by a sensor or a counter.

How do I fix SMART detection error?

Another way to fix SMART errors is to check the drive for errors. You can do this by going to the This PC folder, right-clicking on the drive or its partition, selecting “Service” and running the “Check”. If the error was not fixed during the test, the drive should be defragmented.

Can you reset SMART status?

SMART is meant to be an audit of the drives history and is maintained by the drive itself, so you cannot “reset” or “clear” SMART values.

What causes a SMART error?

What causes smart hard disk error? The SMART status bad error may be caused by bad sectors on the hard drive. In this case, you can try to run chkdsk to fix the corrupted file system and bad sectors to fix the SMART hard disk error.

How did my hard drive get corrupted?

Common causes of hard drive data corruption include:
Read/Write Head Tracking IssuesSudden Power Failures During File Processes. Software Failures. Virus Damage. Malfunctioning Antivirus Software.

Can hard drive be repaired?

Hard drive repair is possible, but they should NOT be reused after a recovery! Of course, HDDs can be repaired! However, a repaired HDD should not be reused, but rather, have its contents recovered immediately and then be discarded as it cannot be trusted to work into the future.

Which lasts longer HDD or SSD?

If you’re looking purely from a numbers standpoint, averages indicate an SSD can last about 20 years, whereas an HDD will last about six. However, these are numbers aren’t set in stone, and you may need to replace your HDD or SSD more or less often depending on a number of factors.

Does SSD expire?

In addition, there’s not as much information on how long SSDs will last simply because they’re newer devices. However, some estimates say that the typical SSD will last for 10 years under normal workloads. That’s an increase from the five to six years that was once used as an estimate.

How do I disable SMART status in BIOS?

Boot into the BIOS and look for a menu titled “Hardware”, “Hard disk” or something similar, and any option in it that references “S.M.A.R.T.”. Highlight the “S.M.A.R.T” option and set it to “Disabled” or “Off”. It is still recommended sometimes to undo this and verify the SMART data.

How can I get SMART data?

How to buy data packs in Smart Cell? dial *141# and select the pack of your choice. You can also take the data pack using the Smart Cell mobile app.

Can SMART data be reset?

SMART is meant to be an audit of the drives history and is maintained by the drive itself, so you cannot “reset” or “clear” SMART values. Hard drives have spare space for recovery reasons. The recovery happens automatically.

What causes SMART status bad?

An error on S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) indicates a Hard Drive Failure. The S.M.A.R.T. Status BAD : Backup and Replace, is a warning that the system’s hard drive or SSD has failed, or is likely to fail in the near future.

Can a corrupted hard drive be fixed?

You can fix a corrupted hard drive by running the CHKDSK command in Command Prompt. Caution: The CHKDSK command known for scanning and repairing drive, allow to use /f and /r attributes to fix the corruption in the hard disk.

Can I recover data from corrupted hard disk?

Can files be recovered from a failed hard drive? Yes, files can be recovered from a failed hard drive by using a skilled data recovery service. Failed hard drives cannot be salvaged with recovery software since the operating system cannot access the device to allow the application to recover the data.