How do you calculate promille?
In Germany, the alcohol levels are expressed as promille, in other words g/1000 l. In order to express c in g/1000 g, the BAC (g/100ml), is multiplied by 10 and divided by 1,056. Alcohol is water-soluble; the water content of any organ or tissue will therefore determine how much alcohol can dissolve in it.
Table of Contents
Is BAC and promille the same?

In the U.S., BAC is measured by volume; in Norway (and other Scandinavian countries) BAC is measured by mass. Statistics can be listed as percents or promille (per mille); .
How do you convert mmol L to BAC?
Conversion unit: one millimole of ethanol per liter of blood is equal to 4.61 milligrams of ethanol per 100 milliliters of blood. To convert serum ethanol level to BAC, move the decimal point 3 places to the left. Example, a 100 mg/dL serum ethanol level is equivalent to a 0.10 (g/dL) BAC, or 0.10% (weight/volume).
How much alcohol in your blood makes you drunk?
BAC-Specific Effects

BAC Level | Generalized Dose Specific Effects |
---|---|
0.200-0.249% | Needs assistance in walking; total mental confusion. Dysphoria with nausea and vomiting; possible blackout. |
0.250-0.399% | Alcohol poisoning. Loss of consciousness. |
0.40% + | Onset of coma, possible death due to respiratory arrest. |
Is 0.15 a high alcohol level?
0.13 – 0.15% – At this point, your blood alcohol level is quite high. You’ll be affected by blurred vision, loss of coordination and balance, and potentially dysphoria (anxiety or restlessness). 0.16 – 0.19% – The term “sloppy drunk” applies.
Is 0.015 BAC high?
For the average-sized male, a BAC of 0.015 is equivalent to about two-thirds of the alcohol content of a standard drink (i.e., about two-thirds of a can of beer, or glass of wine or shot of whiskey). For the average-sized female, that same BAC would be reached on just one-half of a standard drink.
What is the highest alcohol level before death?
Between 400 mg% and 799 mg% blood alcohol level, the onset of alcohol coma can occur. Serum levels of alcohol between 600 mg% and 800 mg% are often fatal.
How many beers is a .08 BAC?
For every one drink, your BAC goes up by about 0.02 percent, so reaching a BAC of 0.08 percent takes about four to five drinks.
Is 1.3 alcohol level high?
0.10 – 0.12% – Obvious physical impairment and loss of judgment. Speech may be slurred. 0.13 – 0.15% – At this point, your blood alcohol level is quite high. You’ll be affected by blurred vision, loss of coordination and balance, and potentially dysphoria (anxiety or restlessness).
How much is 0.5 alcohol in the blood?
Impairment of motor skills may occur at blood alcohol levels lower than 0.08%.
…
Physiological effects of various blood alcohol levels.
Blood alcohol level | Physiological effect |
---|---|
Above 0.5% (500 mg/dL) | Highly dangerous/fatal blood alcohol level. |
What’s the highest blood alcohol level?
1.480%
1.480 BAC. After a car crash that resulted in serious injuries, a Polish man’s BAC was taken and it was 1.480%. That’s the highest BAC ever recorded in known history.
Can you fail a breathalyzer 12 hours after drinking?
Because alcohol metabolism is different for everyone, there is no single answer as to how long a breathalyzer can detect alcohol in a person’s system, but in general, a breathalyzer can first detect alcohol in a person’s system about 15 minutes after it has been consumed and up to 24 hours later.
Is 2.0 blood alcohol level high?
Once an individual approaches or passes 0.20, they are at high risk for serious injury, choking, coma, or death. Understanding the signs, symptoms, and risks of BAC levels 0.20 and higher is critical for being able to save a life.
Can I drive after 2 beers?
One drink can put you over the limit. In New Zealand, the legal limit is 50mg per 100ml of blood (equivalent to 250mcg of alcohol per litre of breath). Even if you’re just over the limit, in the eyes of the law you’re a drunk-driver and a criminal – there is no grey area.
Is 0.14 blood alcohol level high?
What is your BAC after 1 shot?
Even so, the time it takes a man to metabolize a single alcoholic beverage is not one hour, as some would have you believe. Depending on your weight, it can take far longer. On average, one standard American drink will produce a blood alcohol concentration of between 0.02 and 0.04.
What part of the body is the first to be affected by alcohol?
It passes quickly into your bloodstream and travels to every part of your body. Alcohol affects your brain first, then your kidneys, lungs and liver.
Can 1 beer make you fail a breathalyzer?
The more you drink, the longer the alcohol stays in your system. Generally, a breathalyzer test can test positive for alcohol for up to 12 hours after consuming one alcoholic drink.
Is 1.0 alcohol level high?
08% BAC; you will test as legally impaired at this blood alcohol level if you’re 21 or older. 0.10 – 0.12% – Obvious physical impairment and loss of judgment. Speech may be slurred. 0.13 – 0.15% – At this point, your blood alcohol level is quite high.
Can I drink 0.5 alcohol and drive?
However, you can’t get drunk on non-alcoholic beer (up to 0.5%) if you’re a healthy adult. Most people start to feel minor effects of alcohol – such as feeling relaxed and a minor impairment of reasoning and memory – when their blood alcohol content (BAC) reaches 0.04%.
Does drinking water help pass breathalyzer?
Our research shows that manipulations can alter BrAC readings. Specifically, hyperventilation and drinking water before using the breathalyzer were shown to significantly lower the BrAC readings. Breath analyzer operators should be cognizant of these methods that may lead to falsely lower BrAC readings.
Will 1 beer show up on a breathalyzer?
Generally, a breathalyzer test can test positive for alcohol for up to 12 hours after consuming one alcoholic drink.
What is the highest blood alcohol level?
Is 1 beer an hour safe to drive?
Many people follow the “one drink an hour rule” to avoid going over the blood alcohol content of 0.08%. Essentially, the one drink per hour rule means that as long as someone only consumes 1¼ ounces of hard liquor, one beer, or one glass of wine and no more over the course of an hour, then they are safe to drive.
How do you tell if you’re sober enough to drive?
Use the tests that a police officer would use to determine if you would pass. Walking in a straight line, counting backwards, or touching your finger to your nose with your eyes closed are just a few of the sobriety tests police use. A sober friend should be able to tell you if you waiver or lose your balance.